16+2+1 Full Gigabit PoE Switch
Supports powering millions of high-definition network cameras through UTP Category 5 and above unshielded twisted pair cables.
16 10/100/1000Mbps auto-adaptive RJ45 downlink ports support 802.3af/at standard PoE power supply.
2 10/100/1000Mbps uplink electrical ports, which can meet the local NVR storage and aggregation switch or external network equipment connection.
One gigabit uplink SFP photoelectric multiplexing port can be easily connected to the optical fiber backbone network, greatly expanding the scope of application of the equipment.
Support one-key video monitoring mode to achieve mutual isolation between downstream ports, suppress network storms, and improve network performance.
Intelligent detection and identification of powered devices and output of the corresponding POE power, do not damage non-powered devices, never burn equipment.
The PoE port supports a priority mechanism. When the remaining power is insufficient, the power supply of the high-priority port is given priority to avoid overloading the device.
The maximum PoE output power of the whole machine: 300W, the maximum power supply of a single port: 30W
Users can easily understand the working status of the device through the status indicator on the front panel of the device.
Plug and play, no configuration required, simple and convenient.
|Power section||Power supply||Powered by power adapter|
|Adapt to voltage range||DC48V~57V|
|Power consumption||This machine consumes <5W|
|Network port parameters||Port Specifications||1~16 downlink electrical ports: 10/100/1000Mbps|
|UP-LINK G17～G18 uplink electrical port: 10/100/1000Mbps|
|1 gigabit photoelectric multiplexing SFP port|
|Transmission distance||1~16 downlink electrical ports: 0~100m|
|UP-LINK G17～G1 uplink electrical port: 0～100m|
|1 gigabit optical multiplexed SFP port: performance is determined by the module|
|Transmission medium||1~16 Downlink electrical ports: Cat5e/6 standard UTP twisted pair|
|UP-LINK G17～G1 uplink electrical port: Cat5e/6 standard UTP twisted pair|
|Multimode: 50/125μm, 62.5/125μm|
|Single mode: 9/125μm,|
|POE standard||Compliant with IEEE802.3af/IEEE802.3at international standard|
|PoE power supply mode||End Jumper 1/2+, 3/6- (default)|
|PoE power supply||Single port maximum power supply: ≤30W,|
|The maximum power supply of the whole machine: ≤300W|
|web standard||Support IEEE 802.3/802.3u/IEEE802.3af/IEEE802.3at|
|Network Switching Specifications||packet forwarding rate||28.272Mpps|
|MAC address capacity||16K|
|Status indication||power light||1 (green)|
|Electric port indicator||16 (green)|
|Uplink electrical port indicator||2 (green) G17 G18|
|SFP port indicator||1 (green)|
|Protection class||Whole machine electrostatic protection||1a Contact discharge level 3|
|1b Air discharge level 3 Executive standard: IEC61000-4-2|
|Communication port lightning protection||4KV|
|Executive standard: IEC61000-4-5|
|Operating environment||Operating temperature||-10℃~55℃|
|weight||1800g (rack mountable)|
|MTBF (Mean Time Between Failure)||100,000hrs|
Carefully open the box and check the accessories that should be in the box:
One CF-PGE2016N switch
a power cord
a user manual
A warranty card and a certificate of conformity
If you find any shortage or damage of accessories, please contact your local dealer in time.