4+2 Hundred PoE switch
Supports powering millions of high-definition network cameras through UTP Category 5 and above unshielded twisted pair cables.
Four 10/100 Mbps auto-sensing RJ45 downlink ports support 802.3af/at standard PoE power supply.
2 10/100 Mbps uplink electrical ports, convenient to connect to the optical fiber backbone network, greatly expand the scope of application of the equipment.
Support one-key video monitoring mode to achieve mutual isolation between downstream ports, suppress network storms, and improve network performance.
Intelligent detection and identification of powered devices and output of the corresponding POE power, do not damage non-powered devices, never burn equipment.
The PoE port supports a priority mechanism. When the remaining power is insufficient, the power supply of the high-priority port is given priority to avoid overloading the device.
The maximum PoE output power of the whole machine: 65W, the maximum power supply of a single port: 30W
Users can easily understand the working status of the device through the power indicator (POW) and each port status indicator (POE/Link).
Plug and play, no configuration required, simple and convenient.
|Power section||Power supply||Powered by power adapter|
|Adapt to voltage range||DC48V~57V|
|Power consumption||This machine consumes <5W|
|Network port parameters||rate||1~4 downlink electrical ports: 10/100Mbps|
|UPLINK1~2 uplink port: 10/100Mbps|
|Transmission distance||1~4 downlink electrical ports: 0~100m (Default)|
|1~4 downlink electrical ports: 0~250m (CCTV)|
|UPLINK uplink electrical port: 0～100m|
|Transmission medium||1~4 downlink electrical ports: Cat5e/6 standard UTP twisted pair|
|UPLINK1~2 uplink electrical ports: Cat5e/6 standard UTP twisted pair|
|POE standard||Compliant with IEEE802.3af/IEEE802.3at international standard|
|PoE power supply mode||End Jumper 1/2+, 3/6- (default)|
|PoE power supply||The maximum power supply of a single port: ≤30W, the maximum power supply of the whole machine: ≤65W|
|web standard||Support IEEE 802.3/802.3u/IEEE802.3af/IEEE802.3at|
|Network Switching Specifications||packet forwarding rate||0.8928Mpps|
|MAC address capacity||2K|
|Status indication||power light||1 (green)|
|Electric port indicator||2 on RJ45 socket (yellow and green), yellow light indicates PoE, green light indicates Link/act|
|Monitor Mode Indicator||1 (green), when the light is on, the monitoring mode is activated|
|Protection class||Whole machine electrostatic protection||1a Contact discharge level 3|
|1b Air discharge level 3 Executive standard: IEC61000-4-2|
|Communication port lightning protection||4KV|
|Executive standard: IEC61000-4-5|
|Operating environment||Operating temperature||-10℃~55℃|
|Body attributes||Dimensions (L×W×H)||135mm×85.6mm×27mm|
|MTBF (Mean Time Between Failure)||100,000hrs|
Carefully open the box and check the accessories that should be in the box:
One CF-PE204N switch
a power adapter
a user manual
A warranty card and a certificate of conformity
If you find any shortage or damage of accessories, please contact your local dealer in time.