5.8G 900M wireless bridge
◎ product description
The CF-CPE900K is a high-performance enterprise-class outdoor network bridge product that supports 5G full-frequency band and uses 802.11A/N/AN/AC technology. Unique digital tube matching technology, no computer configuration, easily complete point to point, point to-point (within 8 points) equipment matching. Gigabit network interface, 5G 802.11AN MIMO technology wireless processing speed up to 900Mbps. Flexible power supply mode, support 24V POE network cable power supply and 12V 1A DC local power supply, the network cable power supply distance can reach 80 meters (related to the network cable material). Using outdoor IP65 windproof, rainy, dustproof, sunscreen protection grade shell design, easy to adapt to a variety of harsh outdoor environment. Built-in 14dBi double intensified plate antenna, easy and quick to install. With high performance, high gain, high reception sensitivity, high bandwidth and other characteristics, greatly enhance the wireless transmission performance and stability, widely used in medium and short distance video transmission and data transmission.
◎ Product hardware
The 900Mbps high-speed rates and NAT high-conversion rates
CF-CPE900K uses 802.11A/N/AN/AC technology to provide a wireless access speed of up to 900Mbps, which is about 3 times that of 802.11/b/g/n products in the same environment, and the conversion rate of NAT is> 93%, realizing a faster download and upload speed through the external network, and online surfing at will.
Transparent, highly efficient and energy-efficient
The product supports IEEE802.3az, which can enter the low-power mode in a transceiver without a sending frame. When a new frame arrives, the transceiver will return to the active mode in several microseconds, thus achieving an almost transparent energy saving to the upper layer of the protocol. The energy consumption can be automatically adjusted according to the actual flow of the port, which can be quickly converted between full-speed operation and low-power idle mode, saving 30% of the power consumption for users, and greatly saving the operating cost.
Beam forming technology
Through the wave speed forming technology, can automatically adjust the size of the signal weighted value of each array in the array, the antenna direction of zero alignment interference direction and suppress the interference, enhance the system useful signal detection ability, optimize antenna direction, and can effectively track the useful signal, suppress and eliminate interference and noise, even in the close distribution of multiple interference and the same frequency, can successfully suppress the interference.
The pairing is simple and efficient
Without network expertise, no computer operation, the point-to-point, point-to-point, point-to-point (up to the same value.
Support for 5G full frequency band
Supported channels are 36,40,44,48,52,56,60,64,149,153,157,161,182,186,190,194 special channels are not on by default and can be turned on when needed.
◎ product technical indicators
The main chip
|MTK7620DA + 7612E Package 64M RAM|
|Flash Memory||8MB Flash|
|antenna gain||Built-in bipolarization high-gain 14dBi directional plate-shaped antenna|
|port||110 / 100 / 1000Mbps RJ45 port, 110 / 100Mbps RJ45 interface|
|source||Support DC 12V 1A, POE 24V 1A non-standard power supply|
|push-button||1 * Digital switch, short press the digital tube display value plus one
1 * Reset button, and press it for 5 seconds to restore the factory settings
1 * Dial code switch, left and right switch main and slave mode
|Work frequency band||802.11a/n/an/ac: 5.1GHz~5.8GHz (China)|
|Support rate||802.11ac: 6.5Mbps-867Mbps
802.11n: 6.5Mbps and 300Mbps
|Operating / storage temperature||-Temperature: -30℃ ~ + 55℃ (working), -40℃ ~ + 70℃ (stored)
Humidity (non-condensation): 10%~90% (working), 5%~95% (storage)
|classification of waterproof||IP65|
|Signal indicator, 4||Bridge access point: the output power indicator lamp
Below 25% (SIG1 often bright), 25%~50% (SIG1-SIG2 often bright), 50%~75% (SIG1-SIG3 often bright),
75%~100% (SIG1-SIG4 bright).
Bridge client: connect the signal strength indicator light
When the connection fails, when the connection is successful:
0~ -65dBm (SIG1-SIG4 often bright), -66- -75dBm (SIG1-SIG3 often bright), -76~ -85dBm (SIG1-SIG2 often bright), signal intensity below-86dBm (SIG1 often bright)
|LAN1||Gigabit network port status indicator: flashing during cable data transmission, going off when the cable is disconnected.|
|Wireless lamp: flashing when the bridge is running normally|
|Power indicator: power is on and off when power is off.|