6 port 10/100M/1000M L2 Managed PoE Ethernet Switch
6 port 10/100M/1000M L2 Managed PoE Ethernet Switch
Gigabit access, gigabit SFP port uplink
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
◇ Support Gigabit Ethernet port and Gigabit SFP port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
◇ Support physical single-mode single fiber optical path(Bypass) function, pure hardware switching, short switching time, does not affect the data transmission rate and improves the stability of the network system.
Intelligent PoE power sup
◇ meeting the needs of security monitoring, teleconferencing
◇ system, wireless coverage, and other scenarios.
◇ IEEE802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
◇ 802. 1X authentication.
◇ Port isolation, storm control.
◇ IP-MAC-VLAN-Port binding.
Stable and reliable ◇ CCC, CE, FCC, RoHS.
◇ Low power consumption, No fan.
◇ The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE
One-stop remote control and management
◇ HTTPS, SSLV3, and SSHV1/V2.
◇ RMON, system log, LLDP, and port traffic statistics.
◇ CPU monitoring, memory monitoring, Ping test, and cable diagnose.
◇ Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
|Fixed Port|| 4* 10/ 100/ 1000Base-T RJ45 PoE ports 2* 100/ 1000Base-X uplink SFP slot ports
1* console por
|Ethernet Port||Port1-4 can support 10/100/1000Base-T(X) auto-sensing,Full/halfduplex MDI/MDI-X self-adaption|
| Twisted Pair
| 10BASE-T: Cat3,4,5 UTP(≤100 meters)100BASE-TX: Cat5 or later UTP(≤100 meters)
1000BASE-T: Cat5e or later UTP(≤100 meters)
|SFP Slot Port||Gigabit SFP optical fiber interface, default no include optical modules (Onlysupports single-mode single fiber optical module. LC)|
|Wavelength/Distance||multimode: 850nm 0~550M,1310nm 0~2KMsingle mode: 1310nm 0~40KM ，1550nm 0~120KM|
|Ring network||Supports ERPS ring network function, with a maximum number of rings of 5 and a convergence time of<20ms|
|Network Protocol||IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TXIEEE802.3ab 1000Base-X, IEEE802.3z 1000Base-X, IEEE802.3x|
|Forwarding Mode||Store and Forward(Full Wire Speed)|
|LED Indicator||PowerIndicatorLight||PWR：1 Green|
|System indicator||RUN：1 Green|
|Fiber Indicator Light||5-6：1 Green (Link,SDFED)|
|On the RJ45 seat||1-4 Yellow:Indicate PoE|
|1-4 Green: Indicates network working status|
|Reset||Press and hold the reset switch for 10s and release it to restore thefactory settings|
|PoE & Power Sup|
|PoE Por||Port 1 to 4 IEEE802.3af/at|
|Power Supply Pin||Default 1/2 (+), 3/6 (-)|
|Max Power Per Port||15.4W per port, with a maximum power of 30W per port|
|Total PWR||65W/ (AC100-240V)|
|Power Consumption||Standby<6W, Full load<65W|
|Power Supply||52V2.3A 65W|
|Certification & Warranty|
|Power surge protection||IEC 61000-4-5 Level X（6KV）（8/20us）|
|Network interface surge protection||IEC 61000-4-5 Level 4（4KV）（10/700us）|
|MechanicalProperties||IEC60068-2-6 (anti vibration), IEC60068-2-27 (anti shock)IEC60068-2-32 (free fall)|
|Certification||CCC, CE mark, commercial, CE/LVD EN62368- 1, FCC Part 15 Class B,RoHS|
|Operation TEMP /Humidity||-40~+75°C;5%~90% RH Non condensing|
|Storage TEMP /Humidity||-40~+85°C;5%~95% RH Non condensing|
|Dimension (L*W*H)||330mm* 172mm*44mm|
product application diagra：
What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website.
Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.
What is the product warranty?
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone’s satisfaction
Do you guarantee safe and secure delivery of products?
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
How about the shipping fees?
The shipping cost depends on the way you choose to get the goods. Express is normally the most quickest but also most expensive way. By seafreight is the best solution for big amounts. Exactly freight rates we can only give you if we know the details of amount, weight and way. Please contact us for further information.