• 1

Fast delivery Hisense Optical Transceiver - Gigabit fiber optic transceiver (one light and 8 electricity) – Changfei Optoelectronics

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for Fiber Optic Interface Module , Industrial Managed Poe Switch , Ethernet Apl Switch , You would not have any communication problem with us. We sincerely welcome customers all over the world to contact us for business cooperation.
Fast delivery Hisense Optical Transceiver - Gigabit fiber optic transceiver (one light and 8 electricity) – Changfei Optoelectronics Detail:

product description:

This product is a gigabit fiber optic transceiver with 1 gigabit optical port and 8 1000Base-T(X) adaptive Ethernet RJ45 ports. It can help users realize the functions of Ethernet data exchange, aggregation and long-distance optical transmission. The device adopts fanless and low power consumption design, which has the advantages of convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, and the performance is stable and reliable. The equipment can be widely used in various broadband data transmission fields such as intelligent transportation, telecommunications, security, financial securities, customs, shipping, electric power, water conservancy and oil fields.

1 (2)

model CF-1028GSW-20
network port 8×10/100/1000Base-T Ethernet ports
Fiber port 1×1000Base-FX SC interface
Power interface DC
led PWR, FDX, FX, TP, SD/SPD1, SPD2
rate 100M
light wavelength TX1310/RX1550nm
web standard IEEE802.3, IEEE802.3u, IEEE802.3z
Transmission distance 20KM
transfer mode full duplex/half duplex
IP rating IP30
Backplane bandwidth 18Gbps
packet forwarding rate 13.4Mpps
Input voltage DC 5V
Power consumption Full load<5W
Operating temperature -20℃ ~ +70℃
storage temperature -15℃ ~ +35℃
Working humidity 5%-95% (no condensation)
Cooling method fanless
Dimensions (LxDxH) 145mm×80mm×28mm
weight 200g
Installation method Desktop/Wall Mount
Certification CE, FCC, ROHS
LED indicator condition meaning
SD/SPD1 Bright The current electrical port rate is gigabit
SPD2 Bright The current electrical port rate is 100M
extinguish The current electrical port rate is 10M
FX Bright Optical port connection is normal
flicker Optical port has data transmission
TP Bright The electrical connection is normal
flicker The electrical port has data transmission
FDX Bright The current port is working in full duplex state
extinguish The current port is working in half-duplex state
PWR Bright Power is OK

 

What are the indicators of optical fiber transceiver chip performance?
1. Network management function

Network management can not only improve network efficiency, but also guarantee network reliability. However, the manpower and material resources required to develop a fiber optic transceiver with network management function far exceed those of similar products without network management, which are mainly reflected in four aspects: hardware investment, software investment, debugging work, and personnel investment.

1. Hardware investment

To realize the network management function of the optical fiber transceiver, it is necessary to configure a network management information processing unit on the circuit board of the transceiver to process the network management information. Through this unit, the management interface of the medium conversion chip is used to obtain management information, and the management information is shared with ordinary data on the network. data channel. Optical fiber transceivers with network management function have more types and quantities of components than similar products without network management. Correspondingly, the wiring is complicated and the development cycle is long.

2. Software investment

In addition to hardware wiring, software programming is more important in the research and development of Ethernet fiber optic transceivers with network management functions. The development workload of the network management software is large, including the part of the graphical user interface, the part of the embedded system of the network management module, and the part of the network management information processing unit on the transceiver circuit board. Among them, the embedded system of the network management module is particularly complex, and the R&D threshold is high, and an embedded operating system needs to be used.

3. Debugging work

The debugging of the Ethernet optical transceiver with network management function includes two parts: software debugging and hardware debugging. During debugging, any factor in board routing, component performance, component soldering, PCB board quality, environmental conditions, and software programming can affect the performance of an Ethernet fiber optic transceiver. Debugging personnel must have comprehensive quality, and comprehensively consider various factors of transceiver failure.

4. The input of personnel

The design of ordinary Ethernet fiber optic transceivers can be completed by only one hardware engineer. The design of the Ethernet fiber optic transceiver with network management function not only requires hardware engineers to complete circuit board wiring, but also requires many software engineers to complete the programming of network management, and requires close cooperation between software and hardware designers.

2. Compatibility

OEMC should support common network communication standards such as IEEE802, CISCO ISL, etc., to ensure good compatibility of fiber optic transceivers.

3. Environmental requirements

a. The input and output voltage and the working voltage of OEMC are mostly 5 volts or 3.3 volts, but another important device on the Ethernet fiber optic transceiver – the working voltage of the optical transceiver module is mostly 5 volts. If the two operating voltages are inconsistent, it will increase the complexity of the PCB board wiring.

b. Working temperature. When choosing the working temperature of OEMC, developers need to start from the most unfavorable conditions and leave room for it. For example, the maximum temperature in summer is 40°C, and the inside of the optical fiber transceiver chassis is heated by various components, especially the OEMC. . Therefore, the upper limit index of the operating temperature of the Ethernet fiber optic transceiver should generally not be lower than 50 °C.


Product detail pictures:

Fast delivery Hisense Optical Transceiver - Gigabit fiber optic transceiver (one light and 8 electricity) – Changfei Optoelectronics detail pictures


Related Product Guide:

We've been committed to offering easy,time-saving and money-saving one-stop purchasing service of consumer for Fast delivery Hisense Optical Transceiver - Gigabit fiber optic transceiver (one light and 8 electricity) – Changfei Optoelectronics , The product will supply to all over the world, such as: Curacao, Detroit, San Diego, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
  • The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
    5 Stars By Princess from Provence - 2018.09.23 18:44
    This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Sarah from Berlin - 2018.06.09 12:42
    Write your message here and send it to us

    Related products

    • Factory Outlets Stride Ethernet Switch - Industrial grade 5-port Gigabit Ethernet switch – Changfei Optoelectronics

      Factory Outlets Stride Ethernet Switch - Indus...

    • Factory directly Switch Network Adapter - Industrial grade gigabit fiber optic transceiver (2 optical and 8 electrical) – Changfei Optoelectronics

      Factory directly Switch Network Adapter - Indu...

      product description: Support mutual conversion between 10/100Base-TX and 100Base-TX; 8 10/100 Base-T RJ45 ports; 10/100Mbps rate self-adaptation, MDI/MDI-X self-adaptation, full/half-duplex self-adaptation; Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control; Optical links and electrical links have complete connection/activity status indicators; All ports support non-blocking wire-speed forwarding for smoother transmission; Broadcast filtering function, addr...

    • Bottom price Lan Switch Cena - Industrial grade gigabit fiber optic transceiver (one light and four electricity) – Changfei Optoelectronics

      Bottom price Lan Switch Cena - Industrial grad...

      product description: Support mutual conversion between 10/100Base-TX and 100Base-TX; 8 10/100 Base-T RJ45 ports; 10/100Mbps rate self-adaptation, MDI/MDI-X self-adaptation, full/half-duplex self-adaptation; Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control; Optical links and electrical links have complete connection/activity status indicators; All ports support non-blocking wire-speed forwarding for smoother transmission; Broadcast filtering function, addr...

    • Good Wholesale Vendors Internet Lan Adapter - Gigabit fiber optic transceiver (one optical and four electricity) – Changfei Optoelectronics

      Good Wholesale Vendors Internet Lan Adapter - ...

      product description: This product is a gigabit fiber optic transceiver with 1 gigabit optical port and 4 1000Base-T(X) adaptive Ethernet RJ45 ports. It can help users realize the functions of Ethernet data exchange, aggregation and long-distance optical transmission. The device adopts fanless and low power consumption design, which has the advantages of convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, and the performance is stable and re...

    • Short Lead Time for Dual Fiber Single Mode Sfp - 8+2 Gigabit PoE Switch – Changfei Optoelectronics

      Short Lead Time for Dual Fiber Single Mode Sfp ...

      product description: This switch is a 10-port Gigabit unmanaged PoE switch, which is specially designed for security monitoring systems such as millions of high-definition network monitoring and network engineering. It can provide seamless data connection for 10/100/1000Mbps Ethernet, and also has PoE power supply function, which can supply power to powered devices such as network surveillance cameras and wireless (AP). 8 10/100/1000Mbps downlink electrical ports, 2 10/100/1000Mbps uplink el...

    • Professional Design Switch Ethernet Gaming - Industrial grade 5-port Gigabit Ethernet switch – Changfei Optoelectronics

      Professional Design Switch Ethernet Gaming - I...